hoss magazine

Stay in the know

Subscribe to the HOSS newsletter today - you’ll get the inside scoop on design trends, home renos and breaking news. You’ll always have a heads up on our fantastic contests too!

DIY Deconstructed : Refrigerator

Fully flush 42" French Door Bottom Mount Refrigerator by Jenn-Air.

Useful tip - Always work from top to bottom when installing, leveling and adjusting for a perfect fit every time.

Did you know that you can use your own hardware for your fridge handles? Customization makes for a seamless look. 

Step 1

Push the refrigerator into place. Make sure it is level by using the 4 leg levellers at the bottom of the refrigerator.

Step 2

Prior to installing door panels, use the provided template to mark out where hardware goes.

Step 3

Install mounting hardware.

Step 4

Install the panel by aligning the hardware with the mounting pins.

Step 5

Use the mounting pins to adjust the panel, as necessary.

Step 6

To make sure your adjustments are perfect, use the provided tool to measure the reveals. Adjust using the mounting pins, as necessary.

Step 7

Install the bracket for the freezer drawer.

Step 8

Secure the freezer panel to the door, using the bracket you just installed.

Useful tip

For a perfect fit every time, always work from top to bottom when installing, levelling and adjusting.